Industrial Waste Management by Sustainable Way

##plugins.themes.bootstrap3.article.main##

  •   Md. Rasel

  •   Israt Zerin

  •   Sakib Hossain Bhuiyan

  •   Kazi Md Hasanul Hoque

  •   Mazadul Hasan

  •   Md. Mahabub Alam

Abstract

Nowadays Industrial waste management is the key concern over the world. Biogas generation and bio-compost from knitting, cutting, spinning waste is one of the right and sustainable way of waste management. Wastage is generated almost all process in spinning, knitting and cutting in the industry. Cotton contains huge amount of dust, foreign-matters, seed and other particles. Micro dust of cotton waste has no salability and pollutes the atmosphere. Mostly, it is disposed of by burning as a result increase the CO2 level in the atmosphere which is the threat for environment as pollutes the surrounding areas. The main objective of this project is sustainable use of cotton waste by producing biogas and utilization of Slurry after Biogas Generation. Biogas generation by anaerobic digestion is sustainable, cost effective and eco-friendly method in Bangladesh. Finally, our concern is to maximum utilization all collected cotton wastes in a sustainable way i.e. anaerobic digestion way. Our experiments on wastes where those wastes produced bio-gas such as spinning cotton micro dust: 1st of all for production of gas to observe; after 30-40 days of feeding 180cc biogas was generated from 100g cotton spinning dust via lab scale biogas plant & gas also confirmed via flammability test. On the other hand smaller size of cotton cutting jhut fabric show comparatively low gas production and found that gas production depend on decomposition rate of cotton waste. Slurry treatment applied in a plant after generation of biogas and output of this application showing that  many new leafs were grown and looking more refresh within 12-14 days. So, unusable spinning cotton waste can be resources for our economy and environment instead of hazards or waste. We have recommended that yarn singeing machine can be run by produced biogas.


Keywords: Spinning, Cotton Waste, Biogas, Slurry Treatment, Singeing Machine, Plant

References

Md. Rasel, Sakib Hossain Bhuiyan, Md. Shak Sadi, Dr. Ishrat Rafique Eshita,Rajib Mia, Mohammad Tofayel Ahmed, Md. Naime Hossain Bhuiyan, An Approach for Development of Medical Textiles; Safety Issue of Garments (Female) Worker,American Journal of Materials Science 2018, 8(2): 27-31, DOI: 10.5923/j.materials.20180802.01

Islam, M. M., Khan, A. M., Islam, M. M. (2013): Textile Industries in Bangladesh and Challenges of Growth, Research Journal of Engineering Sciences, 2 (2), 31-37.

Md. Rasel, Mohammad Tofayel Ahmed, Mazadul Hasan, Asmot Ullah, Habibur Rahman Abir, Kazi Md Hasanul Haque, Md. Naime Hossain Bhuiyan. A Sustainable Approach to Meeting the Quality of Product in Textile Dyeing Industry; Right First Time (RFT). American Journal of Chemistry and Material Science, Vol. 5, No. 5, 2018, pp. 78-84.

Arun Kanti Guha, Md. Rasel, Mohammad Tanvir Ahmed, Shuchismita Dey, ABM Foisal, Construction of Roadway, Sanitary Latrine Ring and Septic Tank Using Textile Sludge,Resources and Environment 2016, 6(2): 28-40, DOI: 10.5923/j.re.20160602.02.

Md Rasel, Demand for Occupational Safety for Industrial Workers, LAP LAMBERT Academic Publishing, Balti, Riga, Beau-Bassin, Page-168, ISBN 978-613-9-93412-6, November 2018.

https://gain.fas.usda.gov/Recent%20GAIN%20Publications/Cotton%20and%20Products%20Annual_Dhaka_Bangladesh_4-4-2018.pdf

C. Sundar Raj, S. Arul and S. Sendilvelan, “Bio Gas from Textile Cotton Waste - An Alternate Fuel for Diesel Engines”, The Open Waste Management Journal, 2009, 2, 1-5

Arun Kanti Guha, Md. Shak Sadi, “Using cotton cutting waste and knitting waste for biogas production”, Bangladesh Textile Today, August 1, 2016

https://www.thedailystar.net/news-detail-2631

A.K Guha et al., “An Eco Friendly Sustainable Sludge Management Method in Textile Biogas Generation from Textile Sludge and Appropriate Method Finding for Residual Management”, IRT Project Report (Southeast University), 2016.

Sandeep Kumar, Lal Chand Malav, Mahesh Kumar Malav and Shakeel A Kha, Biogas Slurry: Source of Nutrients for Eco-friendly Agriculture, 2015. International J Ext Res. 2:42-46,

Mohammad Tofayel Ahmed, Syeda Farjana, Md. Rasel, Modification of Reduction Clearing Process of Polyester Blend Cotton Knitted Fabric Dyeing,International Journal of Scientific & Engineering Research Volume 9, Issue 3, March-2018 ,ISSN 2229-5518

Oğlakcioğlu, N., & Marmarali, A., Thermal Comfort Properties of Some Knitted Structures. FIBRES & TEXTILES in Eastern Europe 2007. 15(5-6): p. 64-65.

Handbook of Yarn Production: Technology, Science and Economics, By Peter R. Lord.

Md. Rasel, Md. Shak Sadi, Mazadul Hasan, Mehedi Hasan Mridul, Mohammad Tofayel Ahmed, Afzalul Bari Hazari, The Impact of Enzyme Concentration (%) on Different Properties of Knitted Fabric During Bio-polishing and Their Technical Relationship, International Journal of Scientific & Engineering Research ,Volume 9, Issue 2, ISSN 2229-5518, February-2018 S. Chen, B. Mulgrew, and P. M. Grant, “A clustering technique for digital communications channel equalization using radial basis function networks,” IEEE Trans. on Neural Networks, vol. 4, pp. 570-578, July 1993.

Downloads

Download data is not yet available.

##plugins.themes.bootstrap3.article.details##

How to Cite
[1]
Rasel, M., Zerin, I., Bhuiyan, S., Hoque, K., Hasan, M. and Alam, M. 2019. Industrial Waste Management by Sustainable Way. European Journal of Engineering and Technology Research. 4, 4 (Apr. 2019), 111-114. DOI:https://doi.org/10.24018/ejers.2019.4.4.1225.