The Distribution System can be seen as the networking line that interfaces between the large power generators and transmission lines on one hand and the electricity consumers on the other. The system can exist in different topologies among which, the radial form is popular because of its simplicity and comparative low cost of design. The problem of poor power quality and instability has been a major power systems challenge especially in Nigeria. More reliable and stable power systems among other benefits can be enjoyed when system are optimized. Hence, this paper implements the feeder reconfiguration technique as an optimization procedure to minimize the technical losses on the Ondo Road 11kV Feeder Segment. MATLAB is employed to simulate the optimization process and the results showed that an average of 85.47% active power loss reduction on all phases is obtainable with the proposed technique leading to an estimated financial saving of ₦639,999.75 per hour.
M. Dilek, "Integrated Design of Electrical Distribution Systems: Phase Balancing and Phase Prediction Case Studies," Virginia Polytechnic Institute and State University, Blacksburg, Virginia USA2001.
M. A. Kashem, G. B. Jasmon, and V. Ganapathy, "A New Approach of Distribution System Reconfiguration for Loss Minimisation," Electrical Power and Energy Systems, vol. 20, pp. 269-276, 2000.
S. A. Oyetunji, "Development of Substations Emulator for Akure Electric Power," Innovative Systems Design and Engineering (IISTE), pp. 21-29, 2013.
M. E. Baran and F. F. Wu, "Optimal Sizing of Capacitors Placed on a Radial Distribution System," IEEE Transactions on Power Delivery, pp. 735-742, January 1989.
M. Divya and R. Bindu, "Simultaneous Network Reconfiguration and Capacitor Placement for Loss Reduction in Distribution Systems by Ant Colony Optimisation Algorithm," International Journal of Advances in Electrical and Electronics Engineering (IJAEEE), vol. 1, pp. 211-220, 2011.
S. Neelima and P. S. Dr. Subramanyam, "Efficient Optimal Sizing and Allocation of Capacitors in Radial Distribution Systems Using DRDLF and Differential Evolution," ACEEE International Journal on Electrical and Power Engineering, vol. 02, pp. 56-61, November 2011.
R. Dr. Ranjan, A. Mrs. Gaikwad, and L. D. Dr. Arya, "Capacitor Placement for Loss Reduction of Reconfigured Radial Distribution Systems by Depth First Search Algorithm," International Journal of Advanced Engineering and Applications, p. 177, January 2010.
G. Vulasala, S. Sirigiri, and R. Thiruveedula, "Feeder Reconfiguration for Loss Reduction in Unbalanced Distribution System Using Genetic Algorithm," International Journal of Electrical and Electronics Engineering, pp. 754-762, December 3 2009.
V. Rashtchi and S. Pashai, "Network Reconfiguration in Distribution Power System with Distributed Generators for Power Loss Minimisation," in International Conference on Advances in Computer and Electrical Engineering (ICACEE), Philippines, 2012, pp. 42-45.
D. R. Zimmerman, "Comprehensive Distribution Power Flow: Modelling, Formulation, Solution Algoriithms and Analysis," Cornell University, Dissertation1995.
L. Jianwei, M. M. A. Salama, and R. R. Mansour, "An Efficient Power Flow Algorithm for Distribution Systems with Polynomial Load," International Journal of Electrical Engineering Education, vol. 39, pp. 371-385, 2002.
R. Sedgewick, Algorithms: Addison-Wesley Publishing Company, Inc., 1983.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere.