This research aims to study the influences of three types of Nano materials on concrete compressive strength, considered Nano types were Nano-Iron Oxide Fe2O3 (NF), Nano-Manganese Oxide Mn2O3 (NM), and Nano-Silica SiO2 (NS). A constant concrete mix and water content were considered. The used percentages of different types of (NF, NM, and NS) that replaced by the cement content were (0.5, 1.0, 2.0, and 5.0%) of mixture weight (wt). The results demonstrated that the (NS) Nano type has better effect than other types on the concrete compressive strength.
Jonbi, P H Simatupang, A Andreas and A Nugraha. “The long-term effects of nano-silica on concrete” IOP Conf. Series: Materials Science and Engineering 508 (2019).
Xin Wan, Chun-fa Su and Leo Gu Li. “Effects of nano silica on carbonation resistance of concrete” MATEC Web of Conference 275, 02001 (2019).
Maohua Zhang, Wenyue Zhang and Fating Xie. “Experimental study on ASR performance of concrete with nano-particles” Journal of Asian Architecture and Building Engineering. ISSN: 1347-2852, 2019.
Belal Rahmanzadeh, Kamal Rahmani and Saber Piroti. “Experimental study of the effect of water-cement ratio on compressive strength, abrasion resistance, porosity and permeability of nano silica concrete” Fraitura Intergrita Strutturale, 44 (2018) 16-24.
A. Narender Reddy, P. Mounika and R. Moulika. “Study on effect of alccofine and nano silica on properties of concrete- A review” International Journal of Civil Engineering and Technology (IJCIET). Volume 9, Issue 13, December 2018. pp 559-565.
Verya Ghasemipor and Saber Piroti. “Experimental evaluation of the effect of water-cement ratio on compressive, abrasion strength, hydraulic conductivity coefficient and porosity of nano-silica concretes” Journal of Applied Engineering Sciences. ISSN: 2284-7197. Vol. 8 (21), pp, 17-24. 2018.
Ahmed M. Yasien, Muhammad S. El-Feky, Mohamed I. Serag and Hala Elkady. “Durability of nano-modified concrete cured under different regimes” International Journal of Current Trends in Engineering & Research (IJCTER). E-ISSN 2455-1392. Volume 4. Issue 5, May 2018 pp. 1-16.
Hussein M Hamada, Gul Ahmed Jokhio, Fadzil Mat Yahaya and Ali M Humada. “Applications of nano palm oil fuel ash and nano fly ash in concrete” IOP Conf. Series: Materials Science and Engineering 342 (2018).
K.I.M.Ibrahim. “The effect of fibers type and content on nano silica concrete Nsc” Journal of Mechanical and Civil Engineering. Volume 14, Issue 2 (Mar.-Apr. 2017), pp 27-34.
Alaa Gamal, Mahamed Helmy, Khaled Mostafa and Mohamen Hatem. “Behavior of RC beams using nano recycled concrete” 9th International Conference on Nano-Technology in Construction. 17-21 March 2017. Sharm El-Sheikh Egypt.
A. Narender Reddy and T. Meena. “A comprehensive overview on performance of nano silica concrete” International Journal of pharmacy &Technology. ISSN: 0975-766X. April 2017. Vol. 9. Issue No. 1. Pp 5518-5529.
Mahsa Zarehparvar-Shoja and Hamid Eskandari-Naddaf. “Optimizing compressive strength of micro- and nano-silica concrete by statistical method” Civil Engineering Journal. Vol. 3, No. 11, November, 2017.
Wei-Chien Wang, Shao-Yu Wang and Cheng-Hsun Lin. “Effect of hot environment on strength and heat transfer coefficient of nano-clay concrete” Journal of Materials Science and Chemical Engineering, 2016, 4, 45-52.
Lev Alimov and Igor Engovatov. “Nano-modified concrete initial structuring” MATEC Web of Conferences 86, 2016.
Rajeswari Prusty, Bibhuti B. Mukharjee and Sudhirkumar V. Barai. “Nano-engineered concrete using recycled aggregates and nano-silica: Taguchi approach” Advances in Concrete Construction. Vol. 3, No. 4 (2015) 253-268.
Mohamed I. Serag, Hala El-Kady and Muhammad S. El-Feky. “The effect of indirect sonication on the reactivity of nano silica concrete” International Journal of Scientific & Engineering Research, Volume 5, Issue 12. December 2014.
S. Gopinath, P. Ch. Mouli, A.R. Murthy, N.R.Iyer and S. Maheswaran. “Effect of nano silica on mechanical properties and durability of normal strength concrete” Archives of Civil Engineering. LVIII, 4, 2012.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere.