The paper presents the results of analyzing the relationship between cutting force components and the force components exerting on the workrest blade, the ratio of slip - acceleration of the rotation motion between the part and control wheel, translational motion acceleration of the part along the axial axis when longitudinal feed centerless grinding. From that, the method of calculating cutting force components is calculated by measuring the force components exerting on the workrest blade, the ratio of slip, cceleration of the rotation motion between the part with control wheel, translational motion acceleration of the part along the axial axis. On that basis, this research also provides orientation for the construction of a system to measure the force, acceleration, velocity components, ... Then the development direction for the next research is also mentioned in the article.
D. Marinescu Loan, W. Brian Rowe, Boris Dimitrov, and Ichiro Inasaki, Tribology of abrasive machining processes, William Andrew publishing, (2004).
D. Marinescu Loan, Eckart Uhlmann and W. Brian Rowe, Handbook of machining with grinding wheels, CRC Press Taylor & Francis Group, (2006).
F. Hashimoto, N. Suzuki, M. Ozu and M. Miyashita, “Kinetic Analysis of Workpiece in Centerless Girning”. Proceedings ISPE Spring Conf, Japanese, 1978.
W.B.Rowe, Research into the Mechanics of Centerless Grinding, Precision Engineering, Volume 1, Issue 2, pp. 75 – 85, 1979.
Yongbo Wu, Katsuo SYOJT, Tsunemoto KURIYAGAWA, “Investigation of Centerless Grinding (1st report) - grinding force measurement”, Int, J. Japan Soc. Prec. Eng., Vol. 33, No.33, pp. 185-190, ,1999.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere.