Stuck pipe incidents translate to non-productive time. There is a need to mitigate stuck pipe incidents which can be achieved by conforming to recommended practices. Also, quick diagnosis is necessary in order to free a stuck pipe. Trial-and-error method can further complicate the situation. This work aims at diagnosing stuck pipe mechanisms and recommend practices to free a stuck pipe. spANALYZE also estimates the axial force and torque needed to free a stuck pipe caused by differential sticking. spANALYZE is a thick desktop client application developed in C# using the Microsoft Visual Studio 2019 development environment. It is an object-oriented .NET application that utilizes the Windows Presentation Foundation (WPF) architecture for its user interface. Each of the analyzers within spANALYZE were implemented generically as a list of nodes, representing the concept of a flow chart. New analyzers can easily be added simply by programmatically defining each node in the flow chart. Each node has a node identifier, a node type, node text, and the node identifiers of each answer – yes, no and restricted. spANALYZE presents the following benefits: quick and early detection of stuck pipe mechanisms, propose recommended action steps to free pipe, calculate stuck pipe depth, compute the torque and axial force needed to free a stuck string.
W. Bradley, D. Jarman, R. Plott, R. Wood, T. Schofield and D. Cocking, "ATask Force Approach to Reducing Stuck Pipe Costs," in SPE/IADC Drilling Conference, Amsterdam, 1991.
IPM Schlumberger, "Stuckpipe course," 2017.
N. O. Nyakiti, "A Solution Model for Stuck-pipe & Fishing Challenges in Geothermal Drilling: A Case of the Olkaria Geothermal Field," in 6th African Rift Geothermal Conference, Addis Ababa, 2016.
"Drilling Formulas and Drilling Calculations >> Stuck Pipe, "8 September 2011. [Online] Available: http://formulas82.rssing.com/chan-21456036/all_p1.html
F. E. Dupriest, W. C. Elks and S. Ottesen, "Design Methodology and Operational Practices Eliminate Differential Sticking," SPE Drilling & Completion, vol. 26, no. 01, pp. 115-123, March 2011.
M. Mims and T. Krepp, Drilling Design and Implementation for Extended Reach and Complex Wells, Houston, Texas: K&M Technology Group,LLC, 2003.
J. Short, "Fishing and casing repair," Tulsa, OK, PennWell Publishing Co., 1981, p. 365.
J.-P. NGUYEN, Oil and Gas Field Development Techniques: Drilling, Paris: Editions Technip, 1996.
Drilling Course, "Introduction to Stuck Pipe," 26 February 2016. [Online]. Available: http://www.drillingcourse.com/2016/02/introduction-to-stuckpipe.html.
SPE, "Petroleum Engineering Handbook, Volume II: Drilling Engineering (Digital Edition)," Society of Petroleum Engineers, USA, 2007, p. 763.
W. Helmick and A. Longley, "Pressure-Differential Sticking of Drillpipe and How It Can Be Avoided or Relieved," Oil and Gas Journal, no. 55, p. 24, 17 June 1957.
M. Khaghani, "Differential Pressure and Mechanical Pipe Sticking," International Association of Directional Drilling, Houston, 2016.
B. A. Oketch, "Analysis of Stuck Pipe Incidents in Menengai," UNU-GTP, Reykjavik, 2014.
H. A. Elsalam, Y. ElNady, T. Elfakharany and A. S. Dahab, "Systematic Approach to Minimize Stuck Pipe Incidents in Oil Wells," Journal of Al Azhar University Engineering Sector, pp. 255-264, 2016.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere.