Heat Transfer Augmentation

##plugins.themes.bootstrap3.article.main##

  •   Ifeoma B. Asianuaba

Abstract

This article presents a brief review of various methodologies applied for heat transfer enhancement in laminar flow convection regime. Experimental setup for laminar flow convection heat transfer enhancement using insertions has been explained along with the associated results. Nusselt’s number is found to be a key parameter for investigatigation in order to perceive the enhancement in heat transfer. Similarly, the magnetohydrodynamic mixed convection heat transfer enhancement technique has also been explored. The results of isotherms and fluid flow parameters are discussed which directly affect the heat transfer coefficient. This review article complements the literature in related field and thus will be helpful in order to carry out further experiments in heat transfer enhancement in future.


Keywords: Heat Transfer, Laminar Flow, Magnetohydrodynamic, Nusselt’s Nuber

References

Arsenyeva, O. P., Tovazhnyansky, L. L., Kapustenko, P. O., & Khavin, G. L. (2011). Optimal design of plate-andframe heat exchangers for efficient heat recovery in process industries. Energy, 36(8), 4588-4598.

Vasiliev, L. L. (2005). Heat pipes in modern heat exchangers. Applied thermal engineering, 25(1), 1-19.

Sunden, B. (2005, September). High temperature heat exchangers (HTHE). In Proceedings of the 5th International Conference on Science, Engineering and Technology, VIT University, Vellore, India.

Balat, M. (2005). Current alternative engine fuels. Energy Sources, 27(6), 569-577.

Murugesan, A., Umarani, C., Subramanian, R., & Nedunchezhian, N. (2009). Bio-diesel as an alternative fuel for diesel engines—a review. Renewable and sustainable energy reviews, 13(3), 653-662.

Poudel, S., & Deb, D. Study of Modified Internal Combustion Engine to Run with Ethanol. International Journal of Engineering and Applied Sciences, 4(8).

Gupta, K. K., Rehman, A., & Sarviya, R. M. (2010). Biofuels for the gas turbine: A review. Renewable and Sustainable Energy Reviews, 14(9), 2946-2955.

Babrauskas, V. (2006). Effective heat of combustion for flaming combustion of conifers. Canadian Journal of Forest Research, 36(3), 659-663.

Cartellieri, W., Chmela, F. G., Kapus, P. E., & Tatschl, R. M. (1994). Mechanisms leading to stable and efficient combustion in lean burn gas engines. In Proceedings of International Symposium COMODIA.

Singh, S. (2001). U.S. Patent No. 6,237,579. Washington, DC: U.S. Patent and Trademark Office.

Sarma, P. K., Subramanyam, T., Kishore, P. S., Rao, V. D., & Kakac, S. (2003). Laminar convective heat transfer with twisted tape inserts in a tube. International Journal of Thermal Sciences, 42(9), 821-828.

Ahmed, M. A., Shuaib, N. H., Yusoff, M. Z., & Al-Falahi, A. H. (2011). Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid. International Communications in Heat and Mass Transfer, 38(10), 1368-1375.

Manglik, R. M., & Bergles, A. E. (1993). Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: part I—laminar flows.

Manglik, R. M., & Bergles, A. E. (1993). Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part II—Transition and turbulent flows. Journal of Heat Transfer, 115(4), 890-896.

Wang, L., & Sunden, B. (2002). Performance comparison of some tube inserts. International Communications in Heat and Mass Transfer, 29(1), 45-56.

Thakur, R. K., Vial, C., Nigam, K. D. P., Nauman, E. B., & Djelveh, G. (2003). Static mixers in the process industries—a review. Chemical engineering research and design, 81(7), 787-826.

Evans, L. B. (1962). The effect of axial turbulence promoters on heat transfer and pressure drop inside a tube.

Deb, D., & Poudel, S. (2017). Investigation of Heat Transfer Enhancement in Laminar Flow through Circular Tube by using Combined Wire Coil and Wavy Strip with Central Clearance. IJEAT, 6, 158-164.

Dipan Deb, Sajag Poudel, Abhishek Chakrabarti, 2017, Numerical Simulation of Hydromagnetic Convection in a Lid-driven Cavity Containing a Heat Conducting Elliptical Obstacle with Joule Heating, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) Volume 06, Issue 08 (August 2017)

Dipan Deb, Sajag Poudel, Abhishek Chakrabarti, 2017, Numerical Simulation of Hydromagnetic Convection in a Lid-driven Cavity Containing a Heat Conducting Inclined Elliptical Obstacle with Joule Heating, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) Volume 06, Issue 10 (October 2017)

Tong, L. S. (2018). Boiling heat transfer and two-phase flow. Routledge.

Dahariya, S., Pai, A. J., Hwang, G., & Betz, A. R. (2019). POOL BOILING HEAT TRANSFER ENHANCEMENT USING SINTERED PARTICLE WICK STRUCTURE. In ASTFE Digital Library. Begel House Inc..

Zou, A., Poudel, S., Raut, S. P., & Maroo, S. C. (2019). Pool boiling coupled with nanoscale evaporation using buried nanochannels. Langmuir, 35(39), 12689-12693.

Agarwal, S., & Kumar, R. (2019). Advances in Boiling Heat Transfer Enhancement using Micro/Nano Structured Surfaces. European Journal of Engineering Research and Science, 4(11), 82-85.

Rahimian, A., Kazeminejad, H., Khalafi, H., Akhavan, A., & Mirvakili, S. M. (2019). Boiling Heat Transfer and Critical Heat Flux Enhancement Using Electrophoretic Deposition of SiO2 Nanofluid. Science and Technology of Nuclear Installations, 2019.

Chauhan, A., & Kandlikar, S. G. (2019, October). High Heat Flux Dissipation Using Symmetric Dual-Taper Manifold in Pool Boiling. In ASME 2019 17th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers Digital Collection.

Downloads

Download data is not yet available.

##plugins.themes.bootstrap3.article.details##

How to Cite
[1]
Asianuaba, I. 2020. Heat Transfer Augmentation. European Journal of Engineering and Technology Research. 5, 4 (Apr. 2020), 475-478. DOI:https://doi.org/10.24018/ejers.2020.5.4.1869.