Four-Poles Parameter of an Elliptical Cavity Having the Outlet on the Body
##plugins.themes.bootstrap3.article.sidebar##
PDF
Submitted Jun 16, 2020
Published Jul 6, 2020
Published Jul 6, 2020
DOI
Abstract viewed = 177 times
PDF downloaded = 143 times
Issue
Section
Articles
##plugins.themes.bootstrap3.article.main##
This paper deals with the computation of the four-poles parameter of a thin elliptic cylinder in which the output is fitted to the side that is perpendicular to the input side. The four-poles parameter is based on the sound pressure calculated by solving the wave equations, with the assumption that the loss can be ignored. The four-poles parameter is widely used to estimate the noise characteristic for the acoustic system which are composed of several elements of various cross-sectional areas, various shape connected in series.
Keywords: Four-Poles Parameter, Higher-Order Mode, Wave Equation, Mathieu Function
References
N. M. Cuong and J. Okda, “On fitting position of inlet and outlet pipes to elliptic cylinder muffler chambers,” J. Acoust. Soc. Jpn(E) 2, (1981) 71-78.
J.G. Ih, ”The reactive attenuation of rectangular plenum chambers,” J. Acoust. Soc. Am.,157(1), 93-122 (1992)
S. Nishimura, T.Nishimura, and T. Yano, “Acoustic analysis of the noise reduction effect caused by the muffler having perforated pipe,” J. Acoust. Soc. Jpn.,61(10),576-584 (2006).
S. Nishimura, T. Nishimura, T. Yano, “Acoustic analysis of elliptical muffler chamber having a perforated pipe,” J. Sound Vib. 297, (2006) 761-773.
YC. Chan, MC. Chiu, SE. Huang, “Numerical analysis of circular straight mufflers equipped with three chambers at high-order-modes,” Applied Acoustics 155 (2019) 167-179.
Y. Nishimura, S. Nishimura, T. Nishimura, T. Yano, “Sound propagation in soundproofing casement windows,” Applied Acoust. 70, (2009) 1160-1167.
T, Nishimura, T. Ando, T. Ikeda, “Resonance of elliptical muffler chamber having a non-uniformly perforated pipe,” Electronics and Communication in Japan, 85(2002), 22-28.
R. Glav, P. L. Regaud, M. Abom, “Study of a folded resonator including the effects of higher order modes,” Journal of Sound and Vibration, 273(2004), 777-792.
T. M. Whalen, “The behavior of higher order mode shape derivatives in damaged, beam-like structures,” Journal of Sound and Vibration, 309(2008), 426-464.
E. Carrera, F. Miglioretti, M. Petrolo, “Computations and evaluations of higher-order theories for free vibration analysis of beams,” Journal of Sound and Vibration, 331(2012), 4269-4284.
Y. Nishimura, N. H. Quang, S. Nishimura, T. Nishimura, T. Yano, “The acoustic desigh of soundproofing doors and windows,” The Open Acoustic Journal, 2010, 3, 30-37.
Y. Nishimura, S. Nishimura, T. Nishimura, T. Yano “Sound propagation in soundproofing casement windows,” Journal of Applied Acoustics 2009; 70(2009); pp. 1160-1167.
M. Abom, “Derivation of four-pole parameters for including higher-mode effects for expansion chamber mufflers with extended inlet and outlet,” Journal Acoustic Society of America 137(1990), 403-418.
Wu TW, Zhang P, Cheng CYR. “Boundary element analysis of mufflers with an improved method for deriving the four-pole parameters,” Journal of Sound and Vibration 1998; 217(4): pp.767-79.
T, Nishimura, T. Ikeda, “Four-pole-parameters for an elliptical chamber with mean flow,” Electronics and Communication in Japan, 81(1998), 1-9.
A. Selamet, M. B. Xu, Lee N. T. Huff, “Analytical approach for sound attenuation in perforated dissipative silencers with inlet/outlet extensions,” Journal of the Acoustical Society of America 2005;117; 2078.
S. Nishimura, Y. Nishimura, ThuLan Nguyen, “Acoustic performance of an elliptical cavity on the application for soundproof ventilation units installed in dwelling walls,” Journal of Applied Acoustics, Volume 168, November 2020, 107418, 1-9.
N. W. McLachlan, “Theory and application of Mathieu Function,” Clarendon Press. Oxford, 1951.
Downloads
Download data is not yet available.
##plugins.themes.bootstrap3.article.details##
How to Cite
[1]
Nishimura, Y. and Nishimura, S. 2020. Four-Poles Parameter of an Elliptical Cavity Having the Outlet on the Body. European Journal of Engineering and Technology Research. 5, 7 (Jul. 2020), 763-766. DOI:https://doi.org/10.24018/ejers.2020.5.7.1998.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere.
