Chemical Characterization of Nine Locally Made Cement Products for Quality Assurance in Nigeria Cement Industry

##plugins.themes.bootstrap3.article.main##

  •   Stephen A. Odewale

  •   Atilade A. Oladunni

  •   Babatunde O. Oyewale

Abstract

Chemical characterization of Portland limestone cement products collected across the nine existing cement manufacturing plants in Nigeria was conducted using Energy Dispersive X-ray Fluorescence Spectrometer (EDXRF) with the aim of determining conformity with global and local standards and investigating likely variation in quality resulting from differences in the sources of major raw materials, especially limestone used in production. The cement samples are composed essentially of CaO, SiO2, Al2O3, Fe2O3, MgO, Na2O, K2O and SO3 while P2O5, MnO and TiO2 were present in trace amount. In addition to oxide compositions, the mineralogical components: Alite (C3S), Belite (C2S), Celite (C3A), and Ferrite (C4AF), and other cement quality control variables such as Lime Saturation Factor, Silica Modulus and Alumina Modulus of all the nine cement samples analyzed in this study are in agreement with the specifications for Portland limestone cement published by the Standard Organisation of Nigeria (SON), the American Society for Testing and Materials (ASTM), and the British Standards Institution (BSI). The nine cement products also have their compositions in close proportion indicating none of the products is superior in quality irrespective of manufacturer or production site, a common misconception in the Nigerian cement market.


Keywords: Chemical Characterization, Mineralogical Composition, Nigeria Cement Plants, Portland Limestone Cement, X-Ray Fluorescence Spectrometer

References

WHD Consultants Limited. (January 2018). Cement history. Cembytes: Understanding Cement [Online]. Available: https://www.understandingcement.com/history.

J. N. Mojekwu, I. Ademola, and S. Oluseyi. (February 2013). Analysis of the contribution of imported and locally manufactured cement to the growth of gross domestic product (GDP) of Nigeria (1986 – 2011). African Journal of Business Management. [Online]. 7(5). pp. 360–371. Available: http://www.academicjournals.org/AJBM.

J. O. Makoju, “Cement industry in Nigeria: the journey so far,” presented at the 2nd Abitem International Cement Conference, Ikeja, Lagos, September 14, 2010.

I. Oyakhilome, “The Nigerian Cement Industry,” Dunn Loren Merrifield Research, September, 2014.

United Capital. (September, 2019). Nigeria cement sector update – increasing competition amidst long term opportunities. Available: http://www.unitedcapitalplcgroup.com/wp-content/uploads/2019/09/Nigeria-Cement-Sector-update-3.pdf.

D. O. Araromi, S. A. Odewale, and J. O. Hamed. (December, 2015). Neuro-fuzzy modelling of blending process in cement plant. Advances in Science and Technology Research Journal [Online]. 9(28). pp. 27–33. Available: http://doi.org/10.12913/22998624/60779.

S. Tsivilis, E. Chaniotakis, E., Badogiannis, G. Pahoulas and A. Ilias, “A study on the parameters affecting the properties of Portland limestone cements,” Cement and Concrete Composites, vol. 21, issue 2, pp. 107–116, April 1999. https://doi.org/10.1016/S0958-9465(98)00031-6.

Specification for Portland Cement, ASTM Standard C–150, 1999.

Cement: Composition, Specifications and Conformity Criteria for Common Cement, BSI Standard BS EN 197–1, 2011. Available: https://doi.org/10.3403.

Composition, specification and conformity criteria for common cements in Nigeria, SON Standard NIS 444–1, 2003.

Y.-C. Ahn, J.-M. Cho, G.-T. Kim, S.-R. Cha, J.-K. Lee, Y.-O. Park, S.-D. Kim and S.-H. Lee. (2004). Physical, chemical and electrical analysis of dust generated from Cement Plants for dust removal with an Electrostatic Precipitator. Korean Journal of Chemical Engineering [Online]. 21(1). pp. 182-186.

M. H. Almabrok and N. F. Khashin. (March 2019). Investigation on the performance of different cement brands commonly used in Libya. International Journal of Scientific Engineering and Applied Science [Online]. 3(3). pp. 75–79.

F. B. Hani. (2011). Chemical analysis of ordinary Portland cement of Jordan, Assiut University Bulletin for Environmental Researches [Online]. 14(1). pp. 56 – 62.

M. Stajanča and A. Eštoková, “Environmental impacts of cement production,” Unpublished thesis, Lviv Polytechnic National University, Ukraine, 2012.

F. J. Faleye, S. Ogunnubi and O. Olaofe. (2009). Chemical and physical analysis of selected cement samples in Nigerian market. Bangladesh Journal of Scientific and Industrial Research [Online]. 44 (1). pp. 41–50. Available: www.banglajol.info.

C. M. Ikumapayi and E. O. Fakorede. (2019). Quality assurance of available Portland Cements in Nigeria. International Journal of World Policy and Development Studies [Online]. 5(6): pp. 53–63. Available: https://doi.org/10.32861/ijwpds.56.53.63.

K. A. Olonade, M. B. Jaji, S. A. Rasak and B. A. Ojo. (2015). Comparative quality evaluation of cement brands used in South-west Nigeria. Academy Journal of Science and Engineering [Online]. 9 (1). pp. 53–63.

K. I. Omoniyi and O. J. Okunola. (2015). Comparative studies of physico-chemical properties of some selected cements in Nigeria. Nigerian Journal of Technological Development [Online]. 12(2). pp. 54–60.

M. D. Yahaya. (January 2009) Physico-chemical classification of Nigerian Cement. Australian Journal of Technology [Online], 12(3). pp. 164–174.

S. P. Dunuweera and R. M. Rajapakse. (April 2018). Cement types, composition, uses and advantages of Nanocement, environmental impact on cement production, and possible solutions. Advances in Materials Science and Engineering [Online]. Vol. 18. Pp. 1–11. Available: https://doi.org/10.1155/2018/4158682.

R. A Sam, S. A. Bamford, J. J. Fletcher, F. G. Ofosu and A. Fuseini. (2013). Assessment of quality of the various brands of Portland cement products available in the Ghanaian

market. International Journal of Science and Technology [Online]. 2 (3). pp. 252–258.

P. Stutzman, A. Heckert, A. Tebbe and S. Leigh. (2010). Uncertainty in Bogue-calculated phase composition of hydraulic Cements. Journal of ASTM International [Online]. http://doi.org/10.1520/JAI102697.

J. Kim, T. Sungho and K. Rakhyun. (November 2018). Theoretical study on the production of environment-friendly recycled Cement using inorganic construction wastes as secondary materials in South Korea. Sustainability [Online]. Vol. 10. Pp. 449. Available: http://doi.org/10.3390/su10124449.

M. Graeme, Cements, Advanced Concrete Technology, Constituents Material, Netherlands: Elsevier, 2003, pp. 123–125.

Downloads

Download data is not yet available.

##plugins.themes.bootstrap3.article.details##

How to Cite
[1]
Odewale, S.A., Oladunni, A.A. and Oyewale, B.O. 2020. Chemical Characterization of Nine Locally Made Cement Products for Quality Assurance in Nigeria Cement Industry. European Journal of Engineering and Technology Research. 5, 12 (Dec. 2020), 126-129. DOI:https://doi.org/10.24018/ejers.2020.5.12.2008.